2011 Land Pride RC5510
The RC5510, RCM5510, RC6510 and RCM6510 Series Rotary Cutters are designed and built by Land Pride to provide excellent cutting performance on gently sloping or slightly contoured right-of ways, roadsides, pastures, set-aside-acres, or for residue in row crop fields. The 10’ cutting width, 2" to 14" cutting height and ability to cut weeds and brush make them well suited for these applications. This Rotary Cutter utilizes a pull-type selfleveling clevis hitch for attachment to 50-250 hp tractors. This series features a Cat. 5 main driveline and offers various safety guard selections making them an excellent choice for state and municipal mowing applications. Productivity, product life, and product serviceability are significantly improved with the smooth-top feature. The smooth top deck greatly
reduces topside grass accumulation or makes any accumulated clipping removal from the deck a breeze.
Surpassed rugged industry standards - All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Factory assembled - Saves customer set-up time and money.
5 Year gearbox warranty - Shows confidence in gearbox integrity.
Gearbox Seal Protection - Gearbox bottom seal protection for longer bearing life.
2 3/8” Output gearbox shaft - Large output shaft handles shock loads better.
Input driveline: Cat. 5 CV - Holds up to shock loads and harsh mowing conditions.
Star profile drive shafts - Star profile spreads load out to many points on the shaft. More apt to resist bending and twisting under shock loads and harsh mowing conditions.
Easy Greasable drivelines - Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
4 Plate slip-clutch - Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
High blade tip speed - Allows clean cutting of material.
6” Blade overlap - Eliminates skipping during turns.
High cutting capacity - 55 Series: Can cut brushy areas with saplings up to 3 1/2".
65 Series: Can cut brushy areas with saplings up to 4".
12" Deck height - Handles heavy cutting, which reduces balling-up of cut material under the deck.
3/16” Stump jumper backed with a 1" thick mounting bar - Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough conditions.
10 gauge smooth deck top - Reduces accumulation of debris and is easier and faster to clean.
7 Gauge smooth deck bottom - Heavy deck design holds up to harsh conditions. No bottom obstructions.
Replaceable 1/4” side skirt - Reduces debris piercing possibilities. Can be replaced if damaged.
Self-leveling hitch - Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing section - Allow you to shape the cutter to the job. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting.
1” Solid hinge rods - Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
Wing transport lock - Holds transport wing in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling rods - Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs - 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims - Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned center-axle - Protects unit from bumps and ground shock.
Replaceable wheel spindles - Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove two bolts to replace damaged spindle.
Double swivel hitch - Great for uneven terrain, reduces drawbar wear.
Transport Axle - Spring-cushioned on center transport axle optional Walking tandem
Hubs - Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
2011 Land Pride RC5510
- (Input) ASAE Category 5 Star Profile with constant velocity u-joint or conventional (non-cv) u-joint.
(Wing) ASAE Category 4 star profile with slip-clutch or optional Cat. 5 with slip-clutch
- Gear Box
- (Horsepower) 250 HP Splitter
210 HP Center & Wing
- (Options) 6” x 21” Laminated Tires or 15” Rims or 24” x 7.75” x 15”, Used Aircraft Tires with or without foam filling
- 4,730 lbs. Approx.
(Machine) - Single row chain guards, 5 laminated wheels, 540 CV main driveline & standard clevis hitch
- Cutting Capacity
- 3 1/2”
- Deck Height
- (Overall) 16’-5”
- Transport Width
- (Minimum) 7’-6 1/2"
- (Overall) 11’-7”
- (4- 2 per Carrier) 1/2” x 4” Heat Treated Free Swinging Alloy Steel with up lift
(Holder) 3/16" Round dish shaped pan, reinforced with 1" x 5" x 22 3/4" blade bar
(Bolt) Keyed with hardened flat washer & lock nut
- (Side skirt) Bolt-on replaceable 1/4" side
- Deck Material
- 10 gauge Top Deck and 7 gauge Bottom Deck
- Number Wheels
- 5 - Wheel option: 4 on transport axle and one on wing axle
6 - Wheel option: 4 on transport axle and two on wing axle.
- Skid Shoe
- Wing Deck & Weight Box: Reversible & replaceable
Center Deck: 2 with optional mounting location on center deck
- (Wing Offset) - Right Wing Model with weight box on left side
(Wing Transport Protection) - Wing Transport Lock Pin
- (Gear Box) - Gear Lube 80-90W EP
- Cutting Width
- (Weight) 1,860 lbs.
(Type) Pull Type, Self - Leveling Hitch & Clevis
Clevis Type: Standard, Up & Down Swivel (Jack) - Standard
- Blade Speed
- Tip Speed At 540 RPM Center Blades = 14,886 FPM Wing Blades = 14,769 FPM
At 1000 RPM Center Blades = 15,604 FPM Wing Blades = 15,741 FPM
- Cutting Height
- 2” to 14” with
- Hydraulic Type
- (Lift) 3 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
(Wing) 3" x 12" hydraulic cylinders, hoses & fittings
Power Take-Off (PTO)
- Standard PTO
- (Minimum HP) 50